Get a quote

Flat Top
Bollard Covers

Been There, Done Flat

How About Flat?

Ideal Shield’s Flat Top Bollard Covers feature two grooves toward the top of the bollard cover that allows the reflective tape to lay flush against the sleeve, greatly reducing the chances of the tape peeling.

Made from Low-Density Polyethylene Thermoplastic (LDPE), the covers are only available in 1/8″ wall thickness, which will end the need for painting bollards ever again. 

Easily installed with our patented tape (included with every order), our Flat Top Bollard Covers slide cleanly over 4″ or 6″ steel pipe bollards for quick and permanent installation.

While the Flat Top covers are 67″ tall (standard), they’re designed to fit a maximum pipe height of 65″

The Flat Top Bollard Covers are available in our standard colors: Yellow, Onyx Gray, Black, Red, and 285 Blue. 

Reflective tape is included with every order at no additional cost. Colors include yellow, red, and silver.

Request a Quote

Product
Details
Product Details

Made of:

Thermoplastic Polyethylene with Ultra-Violet and Anti-Static Additives

Part Number:

part number guide

Heights:

65"

Max Pipe Fit Height

cut to custom heights with no additional charges

COLORS:

Available in Standard Colors

Reflective Stripes available in Yellow, Red, or Silver

INSTALL:

Patented Installation Tape Included

To Secure a Permanent Fit

The Ideal

Advantage

  • 4″ and 6″ options available
  • Available in 1/8″ wall thickness
  • Cover available in Yellow, Onyx Gray, Black, Red, and 285 Blue
  • Standard height is 67″ but is designed to fit a maximum pipe height of 65″ 
  • Yellow, red, or silver (appears white) reflective tape options included
  • Two pieces of installation tape included for fast installation – no messy adhesive or screws required

Color
Chart


Ideal Shield offers 11 standard colors. Custom colors are available for larger quantities upon request. To discuss a custom color option, please contact our customer service at (866) 825-8659

[ CLICK THE COLORS BELOW TO SEE THEM APPLIED ]

*Reproduction of web colors are not always “what you see is what you get” because colors on your monitor and the color produced physically can, and most likely will, vary. 

285 Blue (Pantone 285C)

Black (Pantone 6C)

Yellow (Pantone 012C)

Gray (Pantone 11C)

Red (Pantone 187C)

What
Size Do
I Need

REFERENCE CHART

  • OD=Outside Diameter
  • ID=Inside Diameter
Pipe OD Sleeve ID Pipe Circum. Pipe Size Ideal Sleeve Size
3.5 3 5/8″ 11″ 3″ 3″
4″ 4 1/8″ 12.5″ 3.5″ 3.5″
4.5″ 4 7/8″ 14″-15″ 4″ 4″
5.563″ 5 7/8″ 17.5″ 5″ 5″
6.625″ 6 7/8″ 20.5″-21.5″ 6″ 6″
7.5″ 7 7/8″ 24″ 7″ 7″
8.625″ 8 7/8″ 27″-27.5″ 8″ 8″
10.75″ 10 7/8″ 34″-34.5″ 10″ 10″
12.75″ 12 5/8″ 37 5/8″ 12″ 12″

Click Here to download the Bollard Cover Measuring Tool Click here for printing information.

Downloads

Frequently
Asked

Questions


The Flat Top Bollard Cover is available to fit 4’’ and 6’’ steel pipe diameters. If you have a larger or smaller pipe size diameter, our standard Dome Top bollard cover fits all pipe sizes 3’’- 10’’.
Measure the circumference (distance around the post) Take that dimension and divide it by pi (3.14) Example: Circumference is 21″ Divide by 3.14 Pipe size in 6.625″ The bollard cover size you need is 6″
Pipe is measured by inside diameter. For example, 6" pipe has an outside diameter of 6 5/8". Our bollard sizes coincide with the pipe’s outside diameter, ex. our 6" cover has an inside diameter of about 6 7/8" to fit over the 6 5/8" outside diameter of a 6” pipe.
Each bollard cover is delivered with two pieces of our patented foam neoprene tape. Apply the neoprene tape around the circumference of the steel bollard 3" down from the top of the post and 3" up from the bottom of the post. Once the tape is applied, slide the bollard cover over, eliciting the sound of air squeezing out between the post and sleeve as it creates a vacuum seal. If the above directions are followed correctly, the Ideal Shield Bollard Cover should fit tight with no gaps.
The Flat Top Bollard Cover is available in Yellow, Onyx Gray, Black, Red, and 285 Blue.
Yes, reflective stripes are available for Ideal Shield’s Reflective Bollard Cover at no additional charge. Reflective stripes are available in silver, red, or yellow.

What our customers are saying

“First and foremost, we have loved the bases. They have gone through the various states of weather that Minnesota has to offer and they are withstanding the weather and doing a great job for us. At this time, we have all of our needs, however, after the Super Bowl and when we head into our spring events we could be looking to purchasing additional signs. ” 

Representative from US Bank Stadium, home of the Minnesota Vikings & Super Bowl 52

“This is just what we were looking for. Well made. We will be installing it next week. Everyone here is excited to have a railing to hang onto with winter coming. We at St. Cyprian thank you and your facility for help us.”

Carl Baltosiewich w/St. Cyprian

“Steris Pharmaceutical chose Ideal Shield handrail because it’s sturdy, and the mounting brackets worked really well. Very happy with the product.”

Kevin Korb - Rite Hite

“When compared to other railing systems, Ideal Shield’s anchor system is cost-efficient and super strong – plus fully removable for relocation. Ideal Shield offers quality products that are very durable and never require painting.”

Donnie Frederick - Odessa College

“Ideal Shield has helped me out of many issues over the last couple of years. The restaurant business is always under a sense of urgency. It’s refreshing when someone drops everything & goes the extra mile to help. That is VERY rare this day & age.” 

Kari Carper - BDH Contracting

Other
products
you may be
interested in

Reflective
Bollard
Covers
Lighted
Bollard
Covers
Steel
Pipe
Bollards